2 Installation Precautions(1) Do Not Use The Capacitor That Has Been Energized On The Device. Except For Capacitors That Are Removed For Periodic Inspection During Electrical Inspection, They Cannot Be Used Again.(2) Even If The Capacitor Is Discharged, A Voltage (Re-Flash Voltage) May Be Generated Between The Terminals. In This Case, Discharge Through A 1kΩ Resistor.(3) The Leakage Current Of Capacitors Stored For More Than Half A Year May Increase. In This Case, Perform Voltage Processing With A 1kΩ Resistor.(4) After Confirming The Rated Value (Electrostatic Capacity And Voltage) Of The Cap...
Date:
2019
-
05
-
09
Views：15
1 Considerations In Circuit Design(1) Designed In The Range Of The Rated Performance Of The Capacitor Specified In The Product Catalog Or The Specification Approval Application (Hereinafter Referred To As The Delivery Approval) Of The Capacitor, Based On The Confirmation Of The Use Environment And The Installation Environment.(2) The Temperature Of Use And The Ripple Current Used Shall Not Exceed The Limits Specified In The Catalog Or Delivery Acknowledgement.1 Do Not Use At Temperatures Above The Upper Limit Temperature (Maximum Operating Temperature).2 No Current Can Be Connected (Current Ex...
Date:
2019
-
05
-
09
Views：12
An aluminum electrolytic capacitor, usually simply called an electrolytic capacitor (e-cap), is a capacitor whose anode (+) consists of pure aluminum foil with an etched surface, covered with a uniformly very thin barrier layer of insulating aluminum oxide, which operates as a dielectric. The electrolyte, which covers the rough surface of the oxide layer, operates as the second electrode, the cathode (-). E-caps have the largest capacitance values per unit volume compared to the two other main conventional capacitor families, ceramic and plastic film capacitors, but articulately sma...
Date:
2019
-
02
-
25
Views：28
The aluminum electrolytic capacitor market is projected to grow at a CAGR of 2.05% to reach US$6.894 billion by 2023, from US$6.105 billion in 2017.Aluminium electrolytic capacitor is one of the most widely used capacitors across industry verticals including communication and technology, energy and power, automotive, and consumer electronics among many others. Rising automotive production coupled with the growing adoption of various consumer electronic devices including smartphone, televisions, and tablets among other will boost the demand for these capacitors. G...
Date:
2018
-
12
-
27
Views：30
ELECTRIC CAPACITOR MARKET SPECIFICATIONS, ANALYSIS FORECAST 2018 TO 2023Electric Capacitor Industry inquire about report is a careful examination of current situation of the market, which covers a few market elements. The Market Report likewise gives an investigative evaluation of the prime difficulties looked by Electric Capacitor Market as of now and in the coming years, which helps Market members in understanding the issues they may confront while working in this Market over a more extended timeframe.Request Sample Copy of Electric Capacitor Market Report:https://www.marketreportsworld...
Date:
2018
-
11
-
13
Views：13
The printed circuit board (PCB) market, on the basis of design, is segmented into low end, mainstream and high end. Printed circuit boards (PCB) are a common method of assembling modern electronic circuits which comprises one or more insulating layers and one or more copper layers containing the signal traces, power and grounds as well. The design of a PCB needs more incessant efforts than the design of an electrical circuit.The modern systems consist of multilayer boards with eight layers. Earlier, components were mounted on the top layer in holes which extended through all layers, hence...
Date:
2017
-
10
-
26
Views：15
Among manufacturers, there is a common perception that the more complicated the concept, the longer it takes to produce a market-ready functional object. This is especially relevant for the highly competitive electronics industry, where product complexity is continuously increasing and improved time-to-market is a primary business objective. It all starts with the Printed Circuit Board (PCB) and electronics design and development companies’ need for shorter, more agile and efficient product development cycles.Most of today’s PCB prototypes are produced by traditional subtractive manufacturing ...
Date:
2017
-
10
-
10
Views：13
CTI America makes precision printed circuit boards. It says it will invest $10 million in the facility and employ at least 80 people. (Thinkstock)WASHINGTON — CTI America Corp., a division of Ontario, Canada-based Circuit Tech Inc., will open a new manufacturing facility in Maryland. CTI America makes precision printed circuit boards. It says it will invest $10 million in the facility and employ at least 80 people.The company is working with the Maryland Department of Commerce to finalize a location, which it says will be up and running within the next 12 months.“We are looking forward to...
Date:
2017
-
09
-
27
Views：21
Overcoming the Potential for FailuresComponent manufacturers are constantly developing smaller and innovative packages for components that are just fractions of a millimeter and have board to component clearances of less than a mil. New accessories that allow placement of these nearly invisible parts can be found in pick and place machines. When the components are placed very close together, how does one effectively clean under something that is extremely small?No lead solder is a relatively recent legislated fact of life that necessitated new fluxes, new solder, new solder processing equipmen...
Date:
2017
-
09
-
25
Views：20
World printed circuit board (PCB) production reached an estimated $58.2 billion in 2016, up 2.2% in real terms, while North American PCB production decreased a mere 0.1%, according to IPC’s newly published World PCB Production Report for the Year 2016. The North American PCB market also continued its downward trend, but at a slowing rate of just -1.7% in 2016, based on data published this week in IPC’s 2017 Annual Report on the North American PCB Industry.The World PCB Production Report shows that more than half the world’s PCBs based on value are now produced in China, but Taiwanese companies...
Date:
2017
-
09
-
21
Views：14
Space savings, greater reliability, low mass, and high ductility are some of the advantages offered by flexible PCBs, but designers must also prepare for their complexity.Space savings, greater reliability, low mass, and high ductility are some of the advantages offered by flexible PCBs, but designers must also prepare for their complexity.Flexible printed circuit boards (PCBs) aren’t much different than rigid boards during the design phase, except that the designer must account for the mechanical complexity associated with flex circuits (Fig. 1). For instance, a flexible PCB can tear if ...
Date:
2017
-
09
-
19
Views：23
Soldering is a process in which two pieces of metals are joined together, with the help of a filler metal referred to as a solder. This filler metal has a low melting point compared to that of the metals to be soldered. The solder is melted in the soldering process. There are different ways in which soldering can be done. You must be thinking what are the different types of soldering used? Read the following post to get an answer to this question.What are the Different Types of Soldering?There are different types of soldering done based on the application. Here are a few types of soldering tha...
Date:
2017
-
08
-
16
Views：10